Search
Close this search box.

RMG 270 MK2

The RMG 270 MK2 gas pressure regulator with spring loaded measuring unit and reversing lever that offers rapid response to load changes and can be installed in any position. This direct acting regulator is ideal for deployment at offtake stations.

Features and Benefits:

  • Diaphragm casing can be rotated through increments of 45° relative to body
  • Rapid response to load changes
  • Regulator can be installed in any position
  • Can be fitted with an over-pressure cut-off valve (OPCO) or under-/over-pressure (UPCO/OPCO)
  • Cartridge design allows easy removal of diaphragm/valve assembly from body for simple maintenance
  • Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbon dioxide and propane; and other gases upon enquiry
  • CE registration according to PED
  • Max. inlet pressure pu max: up to 10.3 bar
  • Outlet pressure range Wd: 0.01 to 0.5 bar
  • SSV setting range
    • Wdso 0.035 to 0.6 bar
    • Wdsu 0.01 to 0.03 bar
  • Connection
    • Pipe screw connection 40 mm, 50 mm
    • Flange DN 50
  • Type:
    • P: without internal Safety Relief Valve (SRV)
    • R: with internal Safety Relief Valve (SRV)

All mechanical components of this device are without potential ignition sources and/ or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.